BS EN 1291-1998 non-destructive testing of welds -magnetic particale of welds-acceptance levels
|
ID： |
ADDFB189A10D4372B93376984BC0C19E |
|
文件大小(MB)： |
0.17 |
|
页数： |
8 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,1291:1998,Incorporating,Amendments Nos. 1,and 2,Non-destructive testing,of welds —,Magnetic particle,testing of welds —,Acceptance levels,The European Standard EN 1291:1998, with the incorporation of,amendments A1:2002 and A2:2003, has the status of a British Standard,ICS 25.160.40, , ,,,,, , ,Copyright British Standards Institution,Reproduced by IHS under license with BSI - Uncontrolled Copy,Document provided by IHS Licensee=Bureau Veritas/5959906001, 10/27/2004,03:17:54 MDT Questions or comments about this message: please call the Document,Policy Group at 303-397-2295.,--`,,,`,,`,``,,````,`,,``,``-`-`,,`,,`,`,,`---,BS EN 1291:1998,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on 15 June 1998,. BSI 27 April 2004,ISBN 0 580 29629 6,National foreword,This British Standard is the English language version of EN 1291:1998,including amendments A1:2002 and A2:2003.,The start and finish of text introduced or altered by amendment is indicated in,the text by tags !". Tags indicating changes to CEN text carry the number,of the amendment. For example, text altered by CEN amendment A1 is,indicated by !".,As agreed by CEN/TC 121/SC 5 resolution 134/2000 and in accordance with,amendment A1:2002, the term “examination” has been replaced by “testing”,throughout the document.,The UK participation in its preparation was entrusted to Technical Committee,WEE/46, Non-destructive examination, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of,British Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible European committee any enquiries on the,interpretation, or proposals for change, and keep the UK interests,informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 5 cover and a back cover.,The BSI copyright notice displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,13988 1 November 2002 See national foreword,14937 27 April 2004 Revision of foreword and deletion Annex ZA,Copyright British Standards Institution,Reproduced by IHS under license with BSI - Uncontrolled Copy,Document provided by IHS Licensee=Bureau Veritas/5959906001, 10/27/2004,03:17:54 MDT Questions or comments about this message: please call the Document,Policy Group at 303-397-2295.,--`,,,`,,`,``,,````,`,,``,``-`-`,,`,,`,`,,`---,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 1291,February 1998,+ A1,May 2002,+A2,December 2003,ICS 25.160.40,Descriptors: Welded joints, refractory materials, steels, quality control, non-destructive tests, detection, weld defects, magnetic particle,testing, acceptability, level : quality, surface condition,English version,Non-destructive testing of welds — Magnetic particle,testing of welds — Acceptance levels,(includes amendments A1:2002 and A2:2003),Contr鬺e non destructif des assemblages soudés —,Contr鬺e par magnétoscopie des soudures —,Niveaux d’acceptation,(inclut les amendement A1:2002 et A2:2003),Zerst鰎ungsfreie Prüfung von,Schwei遶erbindungen —,Magnetpulverprüéfung von,Schwei遶erbindungen —,Zul鋝sigkeitsgrenzen,(enth鋖t 膎derung en A1:2002 und A2:2003),This European Standard was approved by CEN on 26 January 1998,amendment A1 was approved by CEN on 28 April 2002 and amendment A2 was,approved by CEN on 20 November 2003.,CEN members are bound to comply with the CEN/CENELEC Internal,Regulations which stipulate the conditions for giving this European Standard,the status of a national standard without any alteration. Up-to-date lists and,bibliographical references concerning such national standards may be obtained,on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official ver……
……